Our worm gear reducers offer a choice of a good or hollow output shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other decrease gearbox worm reduction gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Velocity Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer products – has been serving industry reliably for over 40 years. Its proven modular style has set the market standard for functionality and may be the most imitated item in today’s worm gear swiftness reducer market. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor effectiveness is important. Contact our technical sales personnel for help determining which gearbox alternative is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and allow for a corner turn with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest procedure of our rate reducers. These gearboxes are created to deal with varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size can be available with plastic-type gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest effectiveness and best output torque of all our velocity reducers. These gearboxes are made to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes will be the best choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating high temperature. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options so they work well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the type of a screw, also known as a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A principal benefit of worm gear reducers can be that they create an output that is 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to change the path of the result, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio