One reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled compact drive. The proper angle arrangement of driving-to-driven machine takes a the least space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical arrangements adaptable to any mounting requirement. Efficient electric motor speeds are decreased to slower speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and lengthy service lifestyle. The hardened ground and polished alloy steel worm develops a soft, work hardened surface on the bronze equipment. For this reason worm gears wear in and improve with prolonged service while various other gears are wearing out. Ever-Power offers a wide selection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If your application involves serious shock loads or possible housing damage from external sources (as in steel mills or mobile equipment applications) Ever-Power can offer fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength that allows the tranny of higher horsepower levels than are feasible with regular cast iron models. Extra heavy part plates connect the worm and gear shaft bearing supports, assuring appropriate meshing of the apparatus under all load circumstances. In smaller sized sizes, fabricated metal reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom velocity and reversed engineered reducers for the application, be it a new project or a primary drop-in replacement for a competitor’s swiftness reducer. Fabricated steel reducers enable Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in substitute saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also includes a hardened, surface and polished alloy steel worm. This combination develops a clean, work-hardened mating surface area of the bronze equipment which boosts with prolonged service.
Worm gearing is a course of gear reducers that utilizes right angle, nonintersecting shafts. This style of reducer provides soft and quiet procedure and permits the probability of large acceleration reductions. These gears are available from stock in a wide selection of ratios, from only 4:1 to as much as 3600:1. The compact design and structure allows worm equipment reducers to be positioned in a relatively small space. Thus, high reductions in a limited package size can be achieved with this configuration. Our worm gear features the constant sliding tooth action between worm and one’s teeth. This escalates the tolerance for weighty loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost in comparison with various other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of experiences uses designed teeth surface area with unsurpassed torque transfer performance with great functionality, efficency and cost.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , sound, little backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one type of reduction gear box which consists of a worm pinion insight, an output worm gear, and includes a right angle output orientation. This kind of reduction gear box is generally used to have a rated motor rate and create a low speed result with higher torque worth based on the decrease ratio. They often times can resolve space-saving problems since the worm equipment reducer is one of the sleekest decrease gearboxes available due to the little diameter of its result gear.
worm gear reducerWorm equipment reducers are also a favorite type of velocity reducer because they provide the greatest speed reduction in the smallest package. With a higher ratio of speed decrease and high torque output multiplier, it’s unsurprising that lots of power transmission systems utilize a worm gear reducer. Some of the most common applications for worm gears are available in tuning instruments, medical examining equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm equipment reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with tough compression-molded glass-fill up polyester housings for a long lasting, long lasting, light weight speed reducer that’s also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a solid or hollow result shaft and show an adjustable mounting position. Both SW-1 and the SW-5, however, can endure shock loading much better than other reduction gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm acceleration reducers. Worm equipment reducers are used for speed decrease and raising the torque for electrical motor drives. You can choose to mount your NEMA motor to the reducer by using the NEMA C encounter flange or make use of a coupling. If you want a coupling for the result or input shaft find our coupling section for choosing the coupling. We offer four assemblies left hand and right hand and double output shaft and shaft insight and shaft result. Interchangeable with many worm gear manufactures. Observe data sheet in product overview for diamensions. If you don’t see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear velocity reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water products drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or components handling systems where large torques/slower speeds are needed.
These reducers are also available with a helical main reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual output shafts or a hollow bore result. The indirect drive models are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They offer an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and service factor for the application. Click on “Specifications” above for a table that will assist in identifying the service element. For service factors above 1.0, multiply the mandatory torque by the assistance factor.
Our standard 700 Series – the heart of Ever-Power acceleration reducer product line – has been serving industry reliably for over 40 years. Its proven modular style has set the sector standard for functionality and may be the most imitated item in the current worm gear quickness reducer market. But why accept a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision worm gear speed reducer during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is made from close-grained cast iron and for rigid gear and bearing support. It also offers excellent temperature dissipation.Dual lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for long and trouble-free life.Essential oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil stuffed.Every unit test run just before shipment.Universal installation with bolt-on ft.Highly modifiable design.All of this at substantially cheaper prices than you have already been accustomed to spending money on reducers of lesser quality. Less