1. The worm equipment reducer can get a huge equipment ratio, and the larger output torque is more compact Tractor Gear box compared to the staggered axle gear mechanism.

2. The two teeth of the worm equipment are in line contact, and the bearing capability is much higher than that of the crossed helical equipment mechanism.

3. The worm equipment reducer transmission is the same as the screw travel, which is a multi-tooth mesh get, therefore the transmission is stable and the sound is very small.

4. The worm gear reducer has self-locking property. When the lead angle of the worm is usually smaller compared to the equivalent friction position between the meshing teeth, the mechanism has self-locking house, and the reverse self-locking could be realized, that is, the worm steering wheel can only be driven by the worm, and the worm can’t be powered by the worm wheel. For example, in the self-locking worm mechanism used in its large machinery, the reverse self-locking real estate can serve as a basic safety protection.

5. The worm equipment reducer has high transmitting efficiency and significant wear. On the other hand, the relative sliding acceleration is large, causing severe use on the tooth surface and serious heat era. To be able to dissipate high temperature and reduce wear, components with better anti-friction and anti-wear properties and good lubrication devices tend to be used, so the cost is high.

6. The axial force of the reducer worm is normally huge, and the anti-lock bearing is set up on the worm shaft of our factory.