Ever-power Taper-Lock pulleys are flangeless for clean, small application. They are manufactured with an 8° taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble. Furthermore, Dodge Taper-Lock® bushings can be found with an optional Diamond D® integral key in popular sizes for a far more precise fit.
Product Features
Stock sizes available up to 12” shaft diameter
Globally acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials available in sintered metal, cast iron, ductile iron, steel and stainless
modifications & accessories
Re-borable bushings available for special bores or important seats, spline broaching.
Common Applications
Aggregate & Cement
Air Handling
Chemical, Oil, & Gas
Food, Beverage, & Pharmaceutical
Paper & Forest
Unit & Baggage Handling
Water & Wastewater
common applications
Any application that requires mounting of something on a shaft
Bushings are essential components to install Dodge mechanical drive elements:
V-belt drives
synchronous drives
roller chain drives

Notes:
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The first two digits represent the utmost bore size and the second two digits represent the bushing length. For example, product number 1008 has a max bore of 1 1.0″ and a total amount of 0.8″
Inch bore sizes are specified with the complete inch followed by the fraction. For example a 1.5″ diameter bore will be 1-1/2. Metric bore sizes are designated with “MM” after the metric dimension (X 25MM). These bushings are simple to install and remove, these bushings match flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings have an 8° taper, are made from steel and have a black oxide coating.

Specs :
Pitch Diameter: 75mm
Outdoors Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron