T Style Flanges For Use With Taper-Lock Bushings

TF Variety Flanges
Model TF flanges are created from the exact same high-strength cast iron as the S flanges, but are created to accommodate the global common Taper Lock bushing for simple set up and removal
TF Kind flanges let for mounting the bushing within the front (hub) side with the flange
TF flanges are available in sizes six through sixteen and will be applied with any style of sleeve as pictured on webpage SF-5
TR Sort Flanges
TR flanges are very similar towards the TF style, but allow for your Taper Lock Bushing for being mounted and eliminated from
the reverse or serration side from the flange
The limited torque ratings from the Taper Lock Bushings let TR flanges to only be utilised with EPDM or Neoprene sleeves
Various bushing sizes are utilized, so they’ve got various optimum bores compared to the TF flanges
Sizes 6 as a result of 16 are available
Taper-Lock Bushings
The industry standard taper lock bushing can be a split layout making it possible for a compression fit with the flange on the shaft without set screws
The simple design can make the installation and elimination effortless whilst the 8° taper grips tight and presents fantastic concentricity
A Decreased degree of inventory may be achieved as a consequence of the many other energy transmission elements that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
doesn’t offer you the Taper-Lock Bushings themselves as these are extensively available from other manufacturers