The Ever-power3/16″ pitch silent chain drive is a higher quickness power transmission medium that offers the maximum in performance and reliability. Quietness and toughness are the consequence of unique design and manufacturing practices. Components will be the finest alloy steels, correctly high temperature treated 
to resist wear and fatigue. Chain hyperlink and sprocket profiles are in accordance with practices founded by the chain market. Morse 3/16″ chain is available in noncorrosive types of components. Morse 3/16″ pitch Silent Chain is produced in three basic types of assembly to provide complete insurance for all drive requirements. Eight standard widths handle load ranges and speeds with economy and long chain lifestyle. Joining pin Insertion of the pin and cotter enables basic field assembly of the chain. Connecting link The connecting link is utilized when chain is certainly cut and assembled in the field. The connecting hyperlink includes 1 pin hyperlink, inside link, 1 connector plate and 2 cotter pins. Take note: Use even amount of pitches in chain. Offset or hunting links unavailable. • For standard drives, side guide chain is preferred for all chains up to and including 15/32″ wide (SCO315). • For standard drives, center guideline is recommended for all chains 19/32″ (SCO319) and wider. • For serpentine drives, reversing secondary shaft rotation, or if adjustable idler {is required|is necessary
Ever-power Silent Chain can be an Inverted Tooth type drive providing particularly smooth, peaceful power transmission at higher speeds up to 5000 FPM. The exclusive Morse Rocker Joint eliminates friction during chain articulation-permitting high rotative velocity with less wear and temperature. All the silent chains and sprockets detailed are to the ANSI regular profile. Chain designation listed as example SC 408, indicating: S.C.-Silent Chain standard link profile and guide 4-Pitch in 1/8″ increments 08-Width in 1/4″ increments All sizes of chain and sprockets listed are of the Center Instruction type except SC302. Standards aren’t in a way that competitive chains could be connected together. They will, however, individually stepped on the same group of standard sprockets. Sprocket designation outlined, for example, 408-38: 4-Pitch in 1/8″ increments 08-Width in 1/4″ increments 38-Number of tooth offset link section Adjustments of centers and a straight number of pitches in the chain length are desirable features for all chain drives. Centers should be selected which lead to an even quantity of pitches in the chain size. When set centers necessitate the use of an odd amount of pitches an offset hyperlink or hunting link can be utilized. As illustrated, this assembly, four pitches lengthy, includes one row of offset links.
features • 99% Efficient Drives • Economical • Simple Installation • Long Life • Space Saver • Reduced Bearing Loads • Soft Drive • Quiet Drive • Awesome Drive • Not Affected by Atmospheric Conditions • Adaptable to Your Centers • High Speeds • The least Maintenance • Adaptable to Acceleration Changes • Positive Drive-No Slide • Wide Rate and H.P. Range