rotary cutter gearbox
Replacement Rotary Cutter gearbox, 40hp rated, 1-three/8″-6 spline input shaft, 1.57″ X twelve tapered spline output shaft and 1:one.47 pace up ratio.
These gearboxes have a sq. housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes.
These are authentic equipment gearboxes
This gearbox will not match the IM400, IM500 and IM60 versions as they have a clean input shaft!
Compare with comparable products

rotary cutter gearbox

Substitute Rotary Cutter gearbox, 40hp rated, 1-three/eight”-six spline input shaft, 1.57″ X 12 tapered spline output shaft and 1:1.47 pace up ratio. These gearboxes have a sq. housing configuration and are identical in mounting and ratio to the round configuration gearboxes. These are authentic gear gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which featured slip clutch PTO shafts. This gearbox will not suit the IM400, IM500 and IM60 models as they have a sleek enter shaft! If your gearbox has a 12 spline output shaft and a 1-three/8″ – 6 spline enter shaft this gearbox will perform. Bolt pattern is 4-3/4″ on heart gap to hole and six-three/four” center to middle of bolt gap on diagonal. The mounting holes type a square bolt pattern.

rotary cutter gearbox
RC-twenty Series
Requirements
Torque: one,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.5, 1:two.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: sixteen oz. (.47 L)
Weight: 34 lbs. (15.four kg)
Applications
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Sequence
RC-30 Series
Specs
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.forty seven, 1:one.71, one:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Excess weight: 51 lbs. (23.one kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Sequence
Requirements
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.forty seven, one:one.71, 1:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Excess weight: fifty six lbs. (twenty five.four kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Accessible with either straight bevel or spiral bevel gearing.
Energy: Hp & Torque primarily based on AGMA formula for continuous obligation additionally a service or load class aspect.
Shafting: Numerous dimensional, metallurgical, and heat-treat alternatives available.
Bearings: Geardrives offered with a variety of bearing lifestyle options.
Lubrication: Drives obtainable with numerous lubes depending on running qualities

No various other company has been able to contend with our new rotary cutter gearbox.