Equipment Packing containers For Rotary Cutter’s, Shredders, and Choppers
RC thirty Collection Gearbox, 40hp Rated, one-three/eight” SB enter, 1-one/2″ X twelve Spline Output. 1:one.forty seven Ratio Exchange your damaged rotary cutter gearbox with this replacement device. Why rebuild when you can change at such a lower value? These gearboxes have been used by Worksaver, HawkLine, Intercontinental, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and many more. Observe: Genuine Gearbox could have a rounded housing or square as revealed, based on existing availability, all interior elements are interchangeable and technical specs for the two bins are identical! This gearbox characteristics a one:one.47 Speed Up gear ratio for use on 5′ and more substantial diameter rotary cutters. Business regular 1-three/eight” sleek diameter input shaft with 1/two” shear bolt gap and retaining ring groove and one.57″ diameter twelve tapered spline output shaft let fitment to most mild, normal and medium obligation rotary cutters. Every gearbox characteristics high speed ball bearing units and heat dealt with gears and shafts to guarantee prolonged existence. 4 bolt mounting matches sector standards. Each gearbox includes blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and call for sixteen ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Original Gear Manufacturer’s (OEM) tradenames, trademarks, drawings, colors, descriptive info and element quantities are used for areas identification reasons only, and DN Equipment, LLC (DN) is in no way implying that any certain elements are OEM parts. Even more, any use of the OEM’s tradenames, trademarks, drawings or portion quantities by DN is developed only to support DN’s customers, in obtaining the correct DN component or ingredient which will replace the OEM’s element.
rotary cutter gearbox