planetary gear box

The Ever-Electricity is a battle-tested modular planetary gearbox system designed specifically for use in the Robotics marketplace. Designers choose one of four productivity shafts, planetary gear box configure a single-stage planetary using among six several reductions, or build a multi-level gearbox using some of different ratio combinations.
Each of the Ever-Electricity gearboxes include installation plates & hardware for typical Robotics Competition motors (550, 775 Series, 9015 size motors) — these plates are custom created for each motor to supply perfect piloting and huge efficiency.
What good is a versatile system if it’s not simple to take apart and re-configure? That’s why we unveiled the Ever-Electrical power with assembly screws in the rear of the gearbox. This makes it easy to change equipment ratios, encoders, motors, etc. without need to take apart your complete mechanism. Another characteristic of the Ever-Electricity that makes it easy to use may be the detachable shaft coupler system. This system allows you to modify motors with no need to buy a particular pinion and press it on. In addition, the Ever-Power uses the same pilot and bolt circle as the CIM, allowing you to work a Ever-Power everywhere a CIM motor mounts.
he Ever-Power has a selection of options for installation. Each gearbox offers four 10-32 threaded holes on top and bottom of its casing for easy area mounting. In addition, additionally, there are holes on leading which allow face-mounting. Easily, these holes will be on a 2″ bolt circle; here is the identical to the CIM motor – anywhere you can attach a CIM-style engine, you can install a Ever-Power.
Other features include:
Six different planetary equipment stages can be utilised to make up to 72 unique gear ratios, the almost all of any COTS gearbox in FRC or FTC.
Adapts to a number of FRC motors (Carrier, Mini CIM, RS-550, RS-775, 775pro, Redline, AM-9015, and CIM)
Adapts to a variety of FTC motors (AndyMark NeveRest, REV HD Hex Electric motor, Tetrix TorqueNADO)
ABEC-1/ISO 492 Class Ordinary Bearings, rated for 20,000+ RPM
AGMA-11 quality world and sun gears made from hardened 4140 steel
The Ever-Vitality v2 assembly is currently held as well as screws that install on the “back” (engine side) of the housing. This implies that the gearbox could be disassembled to change gearsets without getting rid of the gearbox output from the robot. Bosses have been put into the sides of the gearbox so when it’s side-attached you can “crank down” on the installation screws without accidentally misaligning a ring-gear stage. The v1 & v2 source and output blocks cannot be mixed and matched – A v2 input block must be used with a v2 end result block. Ring gears and equipment kits are suitable between v1 & v2
The bottom Ever-Power kits now include an optional pilot ring that will allow users to pilot the Ever-Power on a 0.75″ hole, instead of counting on screw clearances to find the gearbox. The plastic-type motor mounting plates right now pilot on the suggestions block.
Product Overview
Product Usage:
All Ever-Power gearboxes require grease for proper operation and extended life. We advise using our reddish colored tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the apparatus teeth to don in. While we carry out style with short run circumstances at heart, this ‘run in’ period for smooth gearbox procedure, is recommended. Once this is completed, thorough grease of the apparatus teeth periodically to ensure smooth operation.
Single speed planetary gearbox, with the same installation and output interface as a 2.5″ CIM motor. Each planet gear has its own bearing to spin openly on the carrier plate pins. A 2.5″ CIM Motor may also be used as the motor input, but requires this pinion gear ( am-0556) and a CIM Spacer (am-0555).
Motor Input:
9015 motor fits on this gearbox
550 motor fits on this gearbox
2.5″ CIM Motor can be mounted, with a bored-out sun equipment and a spacer
Included Hardware:
Two – 8mm id ball bearings, (19mm od, 22mm od) supporting output shaft
One – Steel world and sun gears, 32 dp, 20 degree p.a.
Five – Planet gears (12 tooth)
One – 15 tooth sunlight equipment, with 0.125 inch bore
One – 40 tooth ring gear
Performance Data:
(with the type being a 9015 Fisher-Price motor)
Input voltage: 12 volts
Stall Torque: 1.12 ft-lb.
Free speed: approximately 4,000 rpm
Assembly Tip:
Install the metal plate to the facial skin of the motor Prior to pressing the pinion gear onto the motor shaft.
Material: body is normally aluminum, shaft is 4140 steel
Mounting Holes: #10-32 tapped holes (2), upon a 2″ bolt circle to attach at output shaft
Exterior dimension: 2.5 in.
Ratio: 3.67:1
Shaft Diameter: 0.313 inch,with 2mm keyway
Weight: 0.63 lbs
Product Features
Stainless steel 416 exceptional non-electrolysis nickle surface treatment
Integrated helical interior ring gear
Patented output sealing systems design
One piece world carrier with productivity shaft design
Plasma nitriding
True helical gear design
Advanced gearing technology crowns business lead of each gear tooth
Deep groove ball bearing
Lubricated with Nyogel 792D (Smart Grease)
With optional high grade backlash of < 1 arc-min
Planetary Gearbox with Output Shaft
Ever-Ability planetary gearboxes with productivity shaft are suitable for an array of drive solutions.
The output shaft comes in several variations, for example, because an output shaft with feather key for positive-fit and trusted power transmission. The feather major is a general connecting element within numerous drive components and enables you to achieve a quick and secure connection between the planetary gearbox with output shaft and your application.
The planetary gearbox with smooth output shaft is the ideal element for obtaining a force-fit connection to a coupling. This enables you to achieve maximum torque transmission even while in reverse mode.
You can also connect the planetary gearbox with result shaft to your travel system with a toothed shaft. Utilizing a toothed outcome shaft standardized to DIN 5480, it is very simple to flawlessly fit additional drive elements such as a pinion with internal gearing.
The input flange of the planetary gearbox is individually adapted to the engine. The compact product of planetary gearbox with result shaft and servomotor boosts your flexibility.
Because of the rotating productivity shaft’s low inertia, planetary gearboxes with end result shaft will be the ideal solution for most dynamic applications. The flexibility of planetary gearboxes with output shaft gives you maximum flexibility to choose the right merchandise for your application.
If, despite the compactness of our planetary gearboxes, you need an even shorter gearbox, you will locate a right position planetary gearbox with output shaft here.
Complete range of modular design planetary gearboxes for professional applications. It combines powerful with low priced and compact size, wonderful reliability, simple set up and reduced repair. Brevini’s professional planetary gearboxes can be found in a variety of sizes to ensure optimum period and silent jogging in a variety of applications. These in-range or right-position planetary gearboxes can be purchased in male and female shaft configurations. The man shaft option (splined or cylindrical) has the capacity to withstand good radial or axial loads on the outcome shaft.
HomeProductsGearboxesAxial Gearboxg700-P planetary gearbox
g700-P planetary gearboxes
Accuracy in the application.
The g700 planetary gearbox is an excellent solution for dynamic and cost-optimized applications.
Its high-level of dependability, long service life and excellent scalability help to make it a precise solution for demanding equipment tasks.
For applications when a medium backlash is necessary
High input speed likely: max. input speed 18,000 rpm
Wide transmission range: i=3 to 512 in 24 ratios
Wide torque range: 44.25 to 7081 lb-in (5 to 800 Nm) in five sizes
Lifetime lubrication for any mounting position
Can be combined with following motors:
With synchronous and asynchronous servo motors in the energy range between 0.33 to 27 Hp (0.25 to 20.3 kW) 2212 to 17,9670 lb-in (250 to 20,300 Nm)
The Ever-Power Planetary Gearbox for Electricity and Precision
vrs inlineFull electricity with the highest degrees of accuracy. The PlanetGear of Ever-Power gets the necessary ability reserves available for the most difficult ability transmission requirements.
compact design
advanced of efficiency
high torsional rigidity
low mass moment of inertia torque
high overload capacity
high dynamics
large transmission ratios
Ever-Power offers innovative, customised gearbox alternatives in a helical-toothed design. The look of the toothing is usually carried out applying KISSsoft and our own design and calculation applications.
As well as the provision of tech support team and advice to your customers, we also dominate the entire engineering process. By working closely as well as our customers, we warranty the development and production of the optimum drive solution in each case.


Gear Rack

As one of leading gear rack manufacturers, suppliers and exporters of mechanical products, We offer gear rack and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gear rack

Recent Posts