O-Ring Chain (LD)/X-Ring Chain (LX)

Highest dress in resistance obtainable by sealing grease concerning pins and bushings
The sturdiness of chain is substantially improved due to the fact grease is sealed amongst the pins and bushings by O-rings. The O-ring chain may be the most reliable model of your Greatest Existence Chain Series with its superb wear resistance even while in the disorders or environments exactly where chain upkeep is difficult.
Advised uses.
?Circumstances the place regular chain substitute is required resulting from dress in stretch
?Circumstances in which lubrication during the service is impossible
?In an atmosphere with significantly soil, sand, dust, and so on.
?Applications that require strength higher than that of a sintered bushing roller chain
Other functions
?Cutting down noise. (The noise level is three dB decrease compared to regular roller chains.)
?Reducing vibration with all the friction designed by O-Ring. (The electrical power reduction as a result of friction is nearly negligible, since the frictional force amongst the pins and bushings is for usually inside the applications.)
Choice of chains
The power of an O-ring chain is nearly the exact same as that of the standard roller chain. (Since the pins are longer than these of conventional roller chain, the typical rupture power is slightly reduced.)
For deciding on an appropriate chain, refer to “Selection of Chains” .
When the services ambient temperature is increased than 80° C, specific heat resistant O-rings has to be made use of. In this case, get in touch with us for additional details.
Connecting back links and offset backlinks
Two forms of connecting links can be found: clearance match and interference match. When high strength or durability is needed, use interference-fit connecting hyperlink. Only 2POJ is available as the offset link for all sizes.
Sprockets
O-ring chain makes use of longer pins than a conventional roller chain. When making use of multiplex O-ring chain, the standard sprocket for multiplex chains cannot be applied.
Caution
O-ring chain is just not suggested in applications exactly where solvents or other substances may perhaps attack “Nitric Rubber”. Particular materials O-rings are also out there for these conditions: Please consult us for details. In general, “Nitric Rubber” is broken by speak to together with the following chemical components.