features a unique embedded magnetic unit that increases effectiveness with a keyless tap to unlock the housekeeping cart or perhaps Space Station cart-leading console and computerized locking after door closure. The eliminates lock/major breakage and related alternative costs.

stainless-steel or powder-covered housekeeping carts, recently redesigned with more style and functionality.
Easy keyless entry
Cabinet automatically locks when door closes
Zero broken locks and keys
Able to retrofit on Shuttle Series® rounded-corner carts
The entranceway lock assembly is a component for your washing machine and tells the washer that the door is closed and locked into place. If the swap has shorted out and not locking, it is certainly no longer delivering the concept to the machine and it will certainly not latch into place. If you discover that your door won’t close, start, or start, it is more than likely an issue with the locker swap assembly. The move is located behind leading panel. You need to take away the gasket to reach the switch.
The ignition lock assembly requires a key be inserted to start out the engine. It is essentially a protection system that prevents the automobile from being started with out a major. The ignition lock assembly as well acts as a switch to turn on and shut off the engine, interior functions, and the lights. In the ignition assembly happen to be pins and tumblers that ensure only the right key will have the ability to start the vehicle. If those tumblers happen to be exhausted or sticking, the ignition lock assembly might not exactly turn actually with the correct important inserted. If the main element or another foreign object breaks off in the ignition, the key will not be in a position to be inserted all the way and won’t turn. At times, the ignition lock assembly may stick in the ‘on’ or ‘run’ situation, and the ignition won’t be able to turn completely off.
Some keys only easily fit into the ignition one way. Flip the main element over and try it again before exchanging the ignition lock assembly.
The steering lock may not allow the key to carefully turn in the ignition. If the steering lock is engaged, try pulling on the steering wheel either way while wiggling the main element in the ignition.
Ignition key won’t turn in the ignition assembly
Key is stuck in the ignition
Engine will not turn off
Ignition essential is cracked because of becoming turned in a stiff assembly.
Important is broken in the ignition lock assembly.
If the ignition lock assembly won’t turn and your vehicle will not start, you may be left stranded waiting for a tow and a cab. If the ignition assembly is normally trapped in the “on” position, your automobile can be left susceptible to theft with the keys trapped inside. Replace the ignition assembly when symptoms get started.
Lock housing (basic plate with installation bolt holes and cover plate with rung mount.
Lock hook – solid lightweight aluminum hooks that engage rungs.
Finger – solid lightweight aluminum finger – depress the hook to allow disengagement of the rung.
Spring – stainless torsion spring- provides computerized action to assembly.
Shoulder bolts & nuts, 3 each shoulder bolts & nuts contain the parts in place and contain the cover plate over the base plate.
Cover plate assembly includes a welded metal tube part that accepts the lock rung and rivets. Cover plates are made in 2 different variants.

Replacement lock assemblies can be purchased in pairs only you need to include instructions and all mounting fasteners.