Fan electric fan motor china electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for alter type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take notice: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several electric motor at a time, we can do our better to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric engine and made to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric engine will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric motor is produced in China.