DUMP TRAILER Power UNIT- SINGLE ACTING
This power unit features a energy up gravity down circuit. Commence the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is usually presented if demanded. Also a strain compen sated movement handle may be extra for the circuit to manage the descent velocity of your cylinder.
Remark: Please check with our revenue engineer for that distinct pump displacement, motor power or tank capacity.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned in advance of set up of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and no cost of impurities.N46 hydraulic oil is advisable.
four. The energy unit really should be mounted horizontally.
5. Check the oil degree during the tank immediately after the initial running on the electrical power unit.
6. Oil modifying is required immediately after the original 100 operation hours, afterwards when every single 3000 hrs.
DUMP TRAILER Energy UNIT-DOUBLE ACTING
This energy unit includes a energy up electrical power down circuit with load holding on the two A & B ports. A strain compensatred flow manage is often extra to circuit to manage the decent speed on the cylinder.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before set up of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities. N46 hydraulic oil is advisable.
four. The electrical power unit needs to be mounted horizontally.
5. Check the oil degree while in the tank soon after the preliminary working on the power unit.
6. Oil shifting is needed just after the first one hundred operation hrs, afterwards once every single 3000 hrs.