Worm Gear Speed Reducers: Double Reduction
Ever-Power. manufacturers double reduction Worm Gear reducers that are designed to last. Double decrease units are created with the same top double reduction gear reducer quality elements as the single lowering Worm Gear reducers.
Double Decrease Worm Gear Velocity Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sturdy shaft input
Mix of two single reduction reducers
Solid or hollow result shafts available
Several styles of bolt-on bases available
Excessive tensile strength cast bronze worm wheel and a hardened and floor alloy steel worm made integral with the shaft for very long and trouble-free life
All cast iron construction
9 Designs: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Lowering Worm Gear Velocity Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock goods at no additional
cost
Dual reduction gearing mechanism can be used in enormous machinery and automotives where in the speed needs to be decreased at a essential level. For eg if the source speed is definitely 2000rpm and the output acceleration desired is definitely 300rpm a reduction gearing mechanism is used for instance a reduction gear box. However in case of dual reduction mechanism, the reduction of speed occurs in 2 steps. At first the suggestions from the engine shaft includes a pinion mounted on it through couplings. This pinion equipment is then linked to an intermediate equipment which is first lowering gear. This gear is then connected to some other low speed pinion on another shaft. This low quickness pinion is linked to the second reduction gear which is attached on the propeller shaft which is the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction devices. A specifically designed primary worm reduction unit is integrally mounted on a typical single reduction Greaves worm reducer which forms the second stage. The composite units provide the most small and rigid set up for large reduced amount of speed necessary for gradual going machinery. A wide variety of ratios upto 4900:1 is available.
The wormshafts are constructed with top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of significant sections welded to rigid centres. Considerable versatility of shaft layout is certainly permissible with all sorts of Double Reduction units
Ever-Power Double Lowering Worm Gearboxes happen to be two stage worm reduction units.
A especially designed primary worm decrease unit is integrally mounted in a standard single lowering AGNEE worm gearbox which forms the second stage. The composite products provide the most small and rigid arrangement for large reduction of speed necessary for slower going machinery. A wide variety of ratios up to 4900:1 is obtainable.
Double Lowering Worm Gear Box Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly employed ratios from the overall range of Ever-Power Twice Reduction Worm Gear Box. Details of other ratios on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All sorts with motor mounting adaptor /
motor – optional
The worm shafts are constructed of high quality case hardening steel, accurately generated, ground and super finished. The worm tires comprise of phosphor bronze centrifugally cast rims of considerable sections welded to rigid centers. Considerable flexibility of shaft layout is definitely permissible with all sorts of Double Reduction units.
Product Description
The products are widely applied in the producing equipments of all sorts of industries household and overseas. They will be the best options for nowadays modern services of mechanical reducing drive control to realize large twisting distance, huge gear ratio, low sound, high performance and low temperature.
Description:
Customized high quality double worm gear quickness reducer aluminium gearbox lowering gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or when customer’s requirements
Noise:
low noise (<50DB)
Advantage:
High Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral