DC MOTOR PUMP GROUP 1
Common Description
Consisting of a heavy duty DC motor along with the CB1S gear pump, this pump motor group is surely an excellent hydraulic power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup methods.
DC MOTOR PUMP GROUP 2
Standard Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump consists of a 4.5″ DC motor as well as a CBSR gear pump that has a standard electrical power up/gravity down circuit which has a relief valve, a examine valve along with a solenoid release valve.
Unique Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned prior to mounting the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~68 cst, which need to also be clean and absolutely free of impurities. N46 hydraulic oil is advised.
four. The power unit really should be mounted horizontally.
5. The relief valve stress is preset about 25% higher than the operating stress.
6. Flow handle valve for lowing pace adjustment is accessible unpon request.