Why Coupling Grease?
Satisfactory lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively built for gear coupling applications to increase coupling existence whilst dramatically reducing servicing time. Its substantial viscosity base oil and tackifier combine to help keep the grease in place and protect against separation and it can be in comprehensive compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and manufactured using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces normally located in couplings. Bearing or common goal greases are likely to separate and eliminate effectiveness on account of high centrifugal forces about the numerous substances at substantial rotational speeds. These large centrifugal forces encountered in couplings separate the base oil through the thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate during the gear tooth mesh area leading to premature coupling failure. Gear Coupling Grease is intended to hugely resistant to centrifugal separation from the oil and thickener, which lets the lubricant to be employed for any comparatively extended period of time.
One of many techniques on the accomplishment of Gear Coupling Grease would be the variable consistency through the entire doing work cycle in the application. The consistency of our gear coupling grease alterations with the operating circumstances. Operating on the lubricant underneath actual service situations triggers the grease to turn into semi-fluid, functionally solash lubricating the wear surfaces in the coupling. Since the grease cools, it returns to the authentic consistency, thereby preventing leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Large load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot beneath substantial speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?