60 chain sprocket

Product features
One strand sprocket with a single set of teeth around the circumference for applications in which a single chain may support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one aspect to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket has a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore using one side, and both hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. The teeth of the sprocket help prevent slipping and binding to avoid power reduction in assemblies. It fulfills International Firm for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is definitely ideal for use in a wide range of applications regarding light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, structure and agricultural gear, conveyors, and factory manufacturing and assembly lines, amongst others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced the teeth ringing its circumference. The distance from the peak of 1 tooth to the next is named the pitch, and is commonly measured in 1/8-in . increments. The sprocket transfers power and motion by a roller chain that’s threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping to ensure that no power can be lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is certainly often fitted to the sprocket’s hub to custom-fit the sprocket onto a shaft to hold it firmly set up. A hub is certainly a protruding, elevated lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets without hubs are Type A sprockets. For applications needing sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts may be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where in fact the drive power of an engine must be transferred into movement, such as in automobiles, conveyors, escalators, agricultural, forestry and mining devices, aeronautics, robotics and space exploration, amongst others.

U.S. Tsubaki Power Transmitting manufactures a number of chains, sprockets, and other power transmission parts that meet International Firm for Standardization (ISO) criteria for quality assurance. The business, founded in 1917, can be headquartered in Wheeling, IL.


Gear Rack

As one of leading gear rack manufacturers, suppliers and exporters of mechanical products, We offer gear rack and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gear rack

Recent Posts