pto gearbox

two) Loosen the bolts only when fitting the shafts. DO NOT take away the bolts entirely. If taken off they could drop into the housing and cause a failure. The box must be disassembled to retrieve the bolts if this happens.

1) Tighten bolts to stay away from oil leaking for the duration of operation. (The bolts have a seal below their heads.)

Take treatment when tightening the four x locking bolts inside of the housing. These bolts resolve the detachable splined shafts in spot.

Observe: When fitting splined shafts.

Click on drawing to enlarge.


one:one.85 velocity increaser with 13/4″Z20 splined output shaft.

Get in touch with us if you have inquiries concerning pto gearbox.